Datasheet4U Logo Datasheet4U.com

ADP7118 - CMOS LDO Linear Regulator

General Description

The ADP7118 is a CMOS, low dropout (LDO) linear regulator that operates from 2.7 V to 20 V and provides up to 200 mA of output current.

This high input voltage LDO is ideal for the regulation of high performance analog and mixed-signal circuits operating from 19 V down to 1.2 V rails.

Key Features

  • Low noise: 11 µV rms independent of fixed output voltage.
  • PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, VOUT ≤ 5 V, VIN = 7 V.
  • Input voltage range: 2.7 V to 20 V.
  • Maximum output current: 200 mA.
  • Initial accuracy: ±0.8%.
  • Accuracy over line, load, and temperature.
  • 1.2% to +1.5%, TJ =.
  • 40°C to +85°C.
  • ±1.8%, TJ =.
  • 40°C to +125°C.
  • Low dropout voltage: 200 mV (typical) at a 200 mA load, VOUT = 5V.
  • User programmabl.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ADP-2-1+ Power Splitter/Combiner Mini-Circuits
ADP-2-10 Power Splitter/Combiner Mini-Circuits
ADP-2-10+ Power Splitter/Combiner Mini-Circuits
ADP-2-1W Power Splitter/Combiner Mini-Circuits
ADP-2-4 Power Splitter/Combiner Mini-Circuits

Other Datasheets by Analog Devices

Part Number Description
ADP7112 CMOS LDO Linear Regulator
ADP7102 CMOS LDO
ADP7104 CMOS LDO
ADP7105 Low Noise LDO Regulator
ADP7142 CMOS LDO Linear Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet ADP7118 20 V, 200 mA, Low Noise, CMOS LDO Linear Regulator FEATURES ► Low noise: 11 µV rms independent of fixed output voltage ► PSRR of 88 dB at 10 kHz, 68 dB at 100 kHz, 50 dB at 1 MHz, VOUT ≤ 5 V, VIN = 7 V ► Input voltage range: 2.7 V to 20 V ► Maximum output current: 200 mA ► Initial accuracy: ±0.8% ► Accuracy over line, load, and temperature ► −1.2% to +1.5%, TJ = −40°C to +85°C ► ±1.8%, TJ = −40°C to +125°C ► Low dropout voltage: 200 mV (typical) at a 200 mA load, VOUT = 5V ► User programmable soft start (LFCSP and SOIC only) ► Low quiescent current, IGND = 50 μA (typical) with no load ► Low shutdown current: 1.8 μA at VIN = 5 V, 3.0 μA at VIN = 20 V ► Stable with a small 2.2 µF ceramic output capacitor ► Fixed output voltage options: 1.8 V, 2.5 V, 3.3 V, 4.5 V, and 5.